New Furnace Cost Guide for Sandy, UT
A new furnace costs about $2,500 to $10,000+ with installation in Sandy, UT, depending on whether you choose electric, gas, or oil. Your total cost depends on the size of your home, the type of system you choose, and the amount of installation work required.
Many Sandy homeowners run into the same problems when trying to replace a furnace: unclear prices, different quotes from contractors, surprise add-on fees, and not knowing which system actually fits their home.
In this guide, you will learn pricing for electric, gas, and oil furnaces, the factors that raise or lower your final bill, and how to estimate your furnace cost accurately before scheduling a replacement.
If you want expert guidance or a fast quote, contact Western Heating, Air & Plumbing at 385-233-9556. Our HVAC technicians in Sandy, Utah, will help you compare systems, understand your cost options, and choose the right furnace for your home.
How Much Does a New Furnace Cost in Sandy, UT?
Electric units are typically the least expensive, while gas and oil models cost more due to higher output and hardware requirements. Below is a quick look at the pricing of each unit before installation or additional charges.
| Furnace Type | Typical Unit Price (Equipment Only) | Notes |
| Electric Furnace | $700 – $3,500 | Most affordable upfront. Best for smaller homes or mild climates. |
| Gas Furnace | $1,500 – $6,500 | Most common in Utah – offers strong heat output and better long-term operating savings. |
| Oil Furnace | $2,500 – $7,500 | Higher upfront equipment cost. Used in fewer Utah homes but offers powerful heat. |
Factors That Influence the Cost of a Furnace Replacement
Your furnace replacement cost depends on the size of your home, the efficiency level you choose, and the amount of installation work required. Additional factors such as duct condition, brand tier, permits, and add-on components can also increase the final price.
Home Size and Heating Needs
Larger homes require furnaces with higher heating capacity, which increases the unit’s price. A smaller home may only need a basic electric or entry-level gas furnace to maintain steady temperatures during winter.
System Efficiency Level
Higher-efficiency furnaces cost more upfront because they use advanced components and sealed combustion designs. Many Utah homeowners choose efficient models to lower their monthly energy bills, especially during colder months when heating demand is high.
Installation Complexity
The amount of work required to install the new furnace directly impacts your final cost. Homes with limited access to the furnace location, such as tight attics, basements, or crawlspaces, take longer to work in and increase labor time. Updates to venting, gas lines, electrical connections, or condensate drains may also be required if the new furnace has different requirements than the old one.
Brand and Model Tier
Different brands offer furnaces at various tiers, from basic to premium. Features such as variable-speed blowers, improved filtration, and longer warranties increase the equipment cost. Homeowners often pay more for mid- or high-tier models because they offer better comfort and reliability.
Ductwork Condition
If existing ducts are damaged, undersized, or leaking, they may need repairs or upgrades before the new furnace can operate correctly. Duct issues can add to the overall replacement cost but are important for airflow and long-term system performance.
Permits and Local Code Requirements
Salt Lake County requires proper permits for furnace replacement. Permit fees, inspections, and safety upgrades, such as venting corrections or gas shutoff improvements, can add to the final amount.
Add-On Components
Thermostats, air cleaners, humidifiers, and improved filtration systems increase the project total. Many homeowners choose to upgrade these components during a replacement to improve comfort or indoor air quality.
Call 385-233-9556 for a free estimate and have our technicians review your furnace replacement needs.
Additional Costs of Furnace Replacement
Beyond the furnace itself, extra costs can come from installation work, duct repairs, thermostat upgrades, permits, and old unit disposal.
Installation and Labor Costs
Replacing the heating unit includes removing the old furnace, setting the new system in place, connecting gas or electrical lines, updating venting, and testing the equipment. Homes with tight access or older mechanical setups often require more time, which raises the overall installation cost.
Ductwork Repairs or Adjustments
If your ducts are leaking, undersized, or damaged, repairs may be needed before the new furnace can run correctly. Proper duct sizing and airflow are important for comfort and efficiency, and fixing these issues can add to the project’s total.
Thermostats and Control Upgrades
Many homeowners choose to replace an outdated thermostat during a furnace installation. Smart thermostats or advanced control systems cost more upfront but offer better temperature management and improved comfort.
Permit Fees and Safety Updates
Salt Lake County requires permits for furnace replacement, and the inspector may require updates to venting, gas shutoff valves, or electrical connections. These fees and upgrades can increase the final amount, but are important for safe operation.
Disposal of the Old Unit
Removing and disposing of the old furnace may come with a small added charge, depending on the contractor and local disposal requirements.
Incentives, Rebates & Energy Savings Programs in Utah
ThermWise Appliance Rebates (Enbridge Gas / Dominion Energy)
Utah homeowners with natural gas service can qualify for ThermWise rebates when installing a high-efficiency furnace or smart thermostat. Rebates vary based on the furnace’s efficiency rating and must be submitted within the utility’s application window. These incentives help lower the upfront price of upgrading to a more efficient gas system.
Rocky Mountain Power WattSmart Incentives
Customers of Rocky Mountain Power may receive cash incentives for qualifying energy-efficient improvements, including smart thermostats, weatherization upgrades, and certain HVAC accessories. While WattSmart does not currently offer rebates for gas furnaces specifically, the program can reduce overall heating and energy use when paired with other upgrades.
Federal Energy Efficient Home Improvement Tax Credit (Section 25C)
Homeowners may qualify for a federal tax credit covering up to 30% of the project cost for qualifying home energy improvements, including high-efficiency furnaces and smart thermostats. Credit amounts vary by equipment type and efficiency tier, and proper documentation is required when filing taxes.
Financing Options to Manage Your Furnace Costs
Many homeowners use financing to spread out the cost of a new furnace, especially when installation or upgrades raise the total amount. Financing can turn a large upfront expense into predictable monthly payments, making it easier to replace a failing system without delay.
Western Heating, Air & Plumbing offers financing options to help you manage your project costs. You can review available plans with our team to find a payment option that fits your budget and timeline.
How to Estimate Your Furnace Cost Accurately?
A calculation of the new furnace cost requires understanding equipment price, installation needs, and the factors that can increase or lower the total amount you pay. Use the points below to build a clear estimate and set a realistic budget.
Key Factors to Review:
- Home size and furnace type: Larger homes need bigger units, which come with higher prices and a wider cost range. Smaller homes may only need mid-tier models.
- Efficiency level: An efficient furnace may cost more upfront, but it can reduce energy bills and create long-term value through better savings.
- Installation costs: The condition of your ducts, access to the furnace area, and required upgrades affect final labor costs and overall replacement costs.
- Rebates and financing: Utility rebates lower the initial amount, while financing spreads out the cost and makes the purchase easier.
- Additional repairs: Old or damaged ductwork and safety upgrades can add to repair costs, increasing the total price of furnace installation.
Plan Your Furnace Budget With Us!
Replacing a furnace is a significant investment, and understanding the pricing details helps you build a realistic budget before moving forward. By reviewing unit costs, installation needs, available rebates, and long-term operating savings, you can choose a system that fits your home and heating goals without surprises. A clear estimate makes it easier to compare options and decide which furnace delivers the best overall value for your home.
Call 385-233-9556 to schedule your free estimate and let our technicians walk you through costs, installation steps, and the best furnace options for your budget.
FAQs
What is the new oil furnace cost for a typical 3-bedroom home?
A new oil furnace for a 3-bedroom home usually ranges from $2,500 to $7,500 for the unit alone. Larger heating needs or higher-efficiency models fall on the upper end of the range.
What is the new electric furnace cost for smaller and mid-size homes?
Most electric furnace units cost $700 to $3,500, depending on the home’s size and heating load. Smaller homes often land at the lower end of this range because they require less output.
How much does a new gas furnace cost in Sandy, UT?
A new gas furnace unit typically costs $1,500 to $6,500 before installation. Pricing depends on efficiency, brand, and the heating capacity needed for your home.
What are the average repair costs for gas furnaces?
Gas furnace repair costs usually range from $150 to $600 for common issues. Larger problems like blower motor failures or heat exchanger issues can cost more.
How much will I pay each month if I finance a new furnace?
Monthly payments depend on the total amount financed and the plan selected, but many homeowners pay between $50 and $150 per month. Financing helps spread out the cost so you can replace the furnace without a large upfront payment.
Will a new furnace increase the value of my home?
A new furnace can increase home value by improving efficiency and lowering future operating costs. Buyers often see updated heating equipment as a sign that the home has been well-maintained.
What should I know before I purchase a new furnace for my home?
You should understand your home’s heating needs, the efficiency level you prefer, and any installation requirements. It’s also important to compare unit pricing, warranties, and long-term energy savings.
Which factors influence installation costs in Sandy, UT?
Installation costs depend on duct condition, access to the furnace location, and whether upgrades are needed for gas, electrical, or venting connections. Older homes often require additional work, which can increase the final price.
Do furnace prices vary during different seasons or promotional periods?
Furnace prices often drop during spring and fall when demand is lower. Many contractors also offer seasonal promotions or incentives that can reduce overall pricing.
